LEDUV Bulbs (2 Pin)

LED/UV Bulbs | 2 Pin | Pack of 4 Includes 50% Discount

For use with Izabelle Hammon branded lamps.

2 Pin UVLED Bulb (9 Watt) for Izabelle Hammon/Calgel lamps.

• LED bulbs that emit UV allowing you to cure | CALGEL, PRO COLOUR, BASE&BUILD and GEL&GO 
• Dual Wavelength 365 + 405
• Reduces CALGEL cure time with an increased intensity compared to traditional filament bulbs

Cure Times for Izabelle Hammon Gels

CALGEL

Colour | 2 minutes minimum. We recommend 3 minutes if using dark colours that have been applied in thicker layers

Clear Base/Top & Sculpting | 300 seconds

PRO Colour

30 seconds - 60 seconds for thicker correction layers and if using Builder Colours.

PRO BASE&BUILD

10 seconds for thin layers or 30 seconds for sculpting/builder layers.

GEL&GO

Colour | 60 seconds for a normal layer – 90 seconds for a thicker layer

2in1 | 60 seconds for a normal layer – 90 seconds for a thicker layer

Care Advice

Please note the following advice from our supplier regarding our LED/UV Bulbs: Although LED bulbs last longer than traditional filament bulbs, please follow the advice below to ensure you get the most from your LED/UV bulbs:

• Turn your lamp off properly between clients this is help to reduce the lamp from becoming hot and burning out your bulbs.
• Ensure that no towels or mats are covering the lamp and that it can cool down efficiently
• Flickering may occur when bulbs become overheated- if this happens, turn the lamp off properly and wait 10-15 minutes before turning back on.
• Like any electrical item, bulbs have a limited life span and will need to be replaced.
• As a guide, we recommend changing your bulbs as per the guidance below to ensure thorough curing of gel for client safety:
• 30 + clients a week: every 6-8 months
• Up to 20 clients a week: every 10-12 months