Force of Nature: Nail Art Tutorials Part 1

1. Apply a base layer of Bayou Bay as normal & cure fully. Do not wipe.
2. Using an applicator sponge, press Asteroid Flakes onto the entire surface of the nail. Making sure none of the flakes are sticking up and there is a smooth surface.
3. Dust away any loose flakes using a fluffy brush.
4. Seal in your design with a final layer of clear gel. We've used Gel&Go 2in1 Base & Top Coat.

Shop Products Used 

1. Apply your French base colour as normal and cure fully. We've used Gel&Go Je T'aime.
2. Using a striping nail art brush, create a French tip using Elderberry. Flash cure your first layer on all fingers. Once the base has been cured fully, repeat for second layer
3. Using a clean striping nail art brush, create a line just underneath the Elderberry using Golden in Design Gel and cure for 1 minute.
4. Finish your design by applying a layer of Gel&Go 2in1 Base & Top Coat.

1. Apply a base layer of Natural Beauty as normal & cure fully. 
2. Remove the sticky residue using GUARD and wait for it to dry.
3. Using tweezers, place flowers from the Hot Berry Floral Decals onto the surface of the gel. Once happy with the placement, press any air bubbles out of the stickers using a rubber end tool. Make sure none of the edges of the decals are sticking up.
4. To seal in the decals and finalise your design, finish with a layer of clear gel to smooth and seal in your design. We've used Gel&Go 2in1 Base & Topcoat.